Hello everyone, thank you for reading this weeks edition of Suits Avenue’s blog! Today we are going to go over the complete guide to suits! The table of contents is below, feel free to scroll around or read the whole thing!! Stop on in the store today for all your suit needs!
Table of Content:
- The fit
- Pant bottoms
- Jacket Collar
- Button Rules
- Types of Suits
- Single breasted
- Double breasted
- Seeing the quality
- 100% wool
- The lining
- The stitching
- The pinch test
- Properly storing your suit
- Cleaning & maintaining your suits
- Folding your suits
When you try on a suit, try to stand in your “Natural stance” this would be how you stand the most often. Just let your body stand natural, your muscle memory will help you with this.
You don’t want the suit to be too loose or too tight, pay extra attention to where your major joints are (Elbows, Shoulders, Hips, Knees, Etc.) If the clothes are too tight you won’t be able to use your full range of motion. If the clothes are too loose, they will be baggy and bunch up in those main key places. You also don’t want the sleeves to pass your wrist too far or the pants to be so long the fabric goes underneath your shoes.
A well-fitted shoulder lies flat. The seam on top of the shoulder should be the same length as the bone under it, and should meet the sleeve of the suit right where your arm meets your shoulder.
If the seam that connects the sleeve to the jacket is hiked up along your shoulder bone, or dangling down on your upper bicep, the jacket is never going to sit properly. In these instances, you’ll see “ripple effects” that create lumps or wrinkles on the sleeve and the top of the jacket. If you can’t move your arms well, or if you cannot pinch just the jacket, it is too small. If the shoulder seam of the jacket is below your shoulder, or the sleeves run farther than 1/2 an inch past your wrist than the jacket is too big.
The trouser break is the bottom of your pants, below the pants cuff. Pants have a couple signs of them being too big or too small. Sometimes the most obvious one is the trouser break, they should rest slightly on the top of your shoes. If it doesn’t go to the top of your shoes it is too small, and if it goes below the middle of your heel it is too big. You don’t want your pant bottoms to drag on the ground, you will step on them, they will rip and tear and it looks tacky. Looking Tacky isn’t ideal when wearing a suit!
The jacket collar should rest easily on the back on your neck and shoulders. If it hangs farther back, or is bunched up causing “ripples” behind your neck, the jacket is too big. If it is tight and has little scrunches the jacket is too small.
When your jacket is buttoned make sure it isn’t making an “x” as shown above. This means the jacket is too tight! It is pulling all the extra fabric it can find to make the button fit.
- The one-button single-breasted suit jacket: Generally used on a tuxedo. These jackets are suited to lean men and worn for black tie events. They are not versatile.
- The two-button single-breasted suit jacket: Is one of the most classic looks in men’s fashion. This style of suit looks good on all body types.
The cut of the suit makes just about every man’s frame look longer. Two-button suits are great for both social and business events.
- The three-button single-breasted suit jacket: Because of the arrangement of the buttons – three button suit jackets suit taller men.
A word on the rules of buttoning a single breasted jacket:
- One button: Always closed except when sitting.
- Two buttons: Use the top one and leave the second button undone.
- Three buttons: Button the center and top ones and leave the third button undone.
Never button the bottom button of a suit jacket.
Types of Suits:
A single–breasted shirt or jacket has a narrow overlap and only one column of buttons. Single-breasted suit jackets and blazers typically have two or three buttons (jackets with one or four buttons are less common), and a notch lapel.
A double–breasted garment is a coat, jacket, or vest with wide, overlapping front flaps which has on its front two symmetrical columns of buttons. Double-breasted suits have a more sophisticated look.
Seeing the quality in your suit:
The first sign to look for regardless of where you buy your suit from is the fabric quality. The only words you want to see are “100% Wool.” If you do not recognize the name of the fabric it is being made of or if it is a concoction of multiple different fabrics, RUN! If you buy something with multiple different fabrics together the chances are it is going to fall apart quickly and last you about 1 nice event… maybe 2.
Look at the lining- A fused lining that’s held together with glue is about as bad as going for a $99 polyester suit. The cheapest quality suits will have a fused lining. The highest quality suits will have a full canvas or at least a half canvas.
Check out the stitching- The ability for mass-manufacturers to replicate what used to be hallmarks of a custom suit has never been greater. With that said, you still want to examine the quality of the craftsmanship and look to see how the suit comes together.
You do not want a suit with jagged, loose, crooked stitching. If the stiching is messy and loose it was probably made quickly and it will not last very long. If you are in a tight spot and can’t afford a high quality suit, just make sure to be careful. Cheaper suits will not last going to the dry cleaners.
PAY ATTENTION TO THE DETAILS:
From the way the pockets come together, to the drape, the buttonholes, and the boutonniere loop. Each of these small details often have the biggest impact when it comes to how you look. Machine-sewn pockets aren’t as sturdy and will wear quickly when utilized. Stiff lapels without a slight roll are a hallmark of a cheap suit. Plastic buttons can break, and even horn buttons that use plastic anchors can fall off in the middle of your board meeting.
The last thing you want is to leave the store with a great navy suit and have it look four shades of blue by next summer. Look at the design. How is it dyed? Is it even and are the colors vivid? Will they fade? Is the pattern perfectly done across the suit, or are they misaligned where the fabric was cut?
Bottom line: look closely and pay attention.
HOW TO TELL A CANVASSED VS. FUSED JACKET – THE “PINCH TEST”
It’s easy to check whether the suit jacket you’re looking at is fused or canvassed. Simply pinch the chest fabric and lining between the fingers of each hand and pull them apart slightly. If it’s canvassed, you should be able to feel three distinct layers: the outside fabric, the canvas, and the lining. If it’s fused, you’ll only feel two layers. To distinguish between Full and Half Canvassing, perform the same pinch test down by the buttons.
How to Store your suits:
If you wear the same suit every day, all day long it will never give the fibers time to relax or air out. It will always stay loose and never have the great “first fit” like it did when you first bought it.
Round, wood hanger:
Using round, wood hangers will give the suit enough space for air to flow through and getting the smells of your every day out. It also helps keep the suit fitting nice and tight. The rounded edges mock the shoulder make so it won’t stretch the suit out, only create enough space for it to relax in the natural form.
Cover it up:
When you aren’t wearing the usit, it should be on the wood hanger as discussed earlier, as well as in an appropriate suit bag. This will keep any bugs or dust from getting into the bag or onto your suit. It also protects it from any unfortunate events that may happen, and makes it easier to travel with.
How to Clean/Maintaine your suits:
Brush your suit with a clothing brush:
This will extend the natural fibers in the suit, allowing it to last longer. It also helps keep the fibers up allowing it to breathe more and not hold in strong odors from the day.
Roll your suit:
Do this after brushing it. Rolling your suit will grab any loose fabric pieces or hair stuck on your suit. It is a little extra step that takes your look a long way!
Steam your suit regularly:
Steaming your suit opens up the fibers, removes stains and marks, as well as the smells from throughout the day. Dry ironing your suit will push the fibers down trapping all stains and stenches, so try to avoid ironing your suits!
Avoid the dry cleaners:
Dry cleaners shorten the lifespan of suits. They use strong chemicals to treat the suits so they are clean. It is only necessary to take your suit to the dry cleaners if you absolutely cannot get the stain or smell out of your suit by brushing it, airing it, or steaming it.
How to fold your suit:
Lay the suit face down on a flat surface with the front up.
Flip the jacket over and fold the left shoulder back. towards the right.
Turn the right shoulder inside out, then tuck left shoulder into the right.
Fold it in half lengthwise, then fold it horizontally.
Place the folded jacket in the center of the outstretched trousers.
Fold the trouser bottoms over the jacket and repeat with the top of the trousers.
Thank you for reading our whole blog! Today we wen’t over the in’s and out’s of owning a suit. We talked about the different types, how they should feel if they fit correctly and how to clean, store, and fold the suits! Following all of these steps doesn’t mean your suit will last forever, but it will help extend the lifetime of your suit! If you have any other questions or have a request for what type of blog you’d like to read next, please leave us a message below and we will get it taken care of for you! 🙂
Find us, Follow us, and like us on FACEBOOK for latest fashion Trends…
Click and SHARE…We would love to help your friends look smart…🕺💃
If you have any questions